Entries by Billy Wenk

Porsche Cayman GT4 Track Prep

Porsche Cayman GT4 Track Prep This past week we had a Porsche Cayman GT4 in for track prep. The Porsche Cayman GT4 is going to be attending the  Carolinas Region PCA HPDE event we are hosting at CMP in Kershaw, SC. Below we will highlight a few points that should be inspected anytime before a […]

Shop car to GT2 CUP!

We have been hard at work over the past week working on the shop car! Currently, we are using it as our first test car for vehicle wraps in collaboration with Salem Detailing, our sister company.

Porsche IMS Bearing Failure

Porsche IMS Bearing Failure If you have researched Porsche models ranging from 1998-2008, it is more then likely you have come across an article or two related to Porsche IMS bearing failure. The purpose of this article is to explain what the Porsche IMS bearing is and what causes the Porsche IMS bearing failure. Any […]

Wind Tunnel Testing!

This week we wrapped up the aerodynamics portion on one of the shop GTB3 Cayman builds! In order to set up the aerodynamics properly, we took the car to the wind tunnel where we focused on the following..

Ferrari F430 Common Problems

The Ferrari F430 has quite possibly bottomed out with regard to its current market value.  The vehicle has become increasingly more available on the second hand market and the majority of these vehicles can be found for less than $100,000.00.  Therefore, we have put together information on the Ferrari F430’s most common problems to be […]